Sugarcane Bagasse Dryer

Bagasse dryer is used for drying sugar cane bagasse to make pellet fuels or powder feeds.

-Capacity:1.5-12 t/h
-Dried Moisture:12-15%(adjustable)

-Raw material type:
suitable to drying sugar cane bagasse to make pellet fuels or powder feeds.

-Applicable:
Used as animal feeds, or heating fuels for boilers, power plants, etc.

Get Solutions / Quote # Customize lines according to your actual needs.

Introduction & Principle

The bagasse dryer is used for drying sugar cane bagasse to make pellet fuels or powder feeds. The bagasse dryer mainly consists of a heater, feeding machine, rotary drum, discharging machine, induced draft fan, unloading feeder, cyclone, and power distribution cabinet form.

Bagasse dryers can be used in food, feed, fertilizer, chemical, pharmaceutical, and mining industries. According to the different requirements of the dryer. We have different heat sources. For example, direct heating model hot blast stove, indirect hot blast stove, heat conduction oil, electric heating, steam, etc. This dryer is suitable for drying the material with moisture less than 65%.

The wet sugarcane bagasse fed into the drying machine will be uniformly distributed in the drum in the copy board agitator, with uniform dispersion, and full contact with the hot air furnace. Then the wet material will be fully dried.

Configuration

The bagasse dryer mainly consists of a heater, feeding machine, rotary drum, discharging machine, induced draft fan, unloading feeder, cyclone, and power distribution cabinet form. Bagasse dryers can be used in food, feed, fertilizer, chemical, pharmaceutical, and mining industries.

The crushed materials of which the moisture is about 35%-65% are sent into the roller by conveyor to realize downstream drying. Under the effect of the inner shoveling plate, materials are taken and scattered constantly, and move in the spiral forward method. Through three layers (inner, middle, and outer layer), heat exchange is realized between the material and hot air medium.

Parameters

Model	Input(t/h)	Output(t/h)	Initial Moisture(%)	Final Moisture(%)	Drying Temperature(℃)	Total Power(kw)	Plant Area (m²)
DLSG1409	1.53	0.45	40±5	15% (Adjustable)	280±30℃	34	5m×15m
DLSG1615	2.89	0.85				45	6m×22m
DLSG2008/3	5.2	1.53				78	8m×16m
DLSG2010/3	6.63	1.95				90	8m×18m
DLSG2210/3	7.24	2.13				105	8m×20m
DLSG2510/3	8.91	2.62				125	10m×20m
DLSG2512/3	10.5	3.09				140	10m*24m
DLSG2912/3	12.14	3.57				155	10m*24m

Raw materials and Applications

Our biomass plant is suitable for a variety of different types of raw materials, crushing all kinds of biomass raw materials and pressing them into rod-like biomass pellets or briquettes, which can be used as a new energy for power plant power generation, heating, barbecue, boiler fuel, etc. and also can be carbonized to make biochar for soil.