Common trouble shooting method of wood chips pellet equipment

Wood pellet machinery is the key equipment in the feed industry, wood pellet machine can run normally, directly affect the economic efficiency of enterprises, so the correct operation of wood pellet mechanical equipment is very important.However, due to such and such reasons, there will inevitably be some failures.As long as we have a quick and effective way to solve it, the fault is not terrible. In the following article, we will introduce the solution to the common trouble of the sawdust and particle machine, so we can see it together!

1.Production is too low or even out of stock:This is due to the initial use of the mold, the poor smoothness of the mold hole; the pressure roller or die aging, serious wear; material moisture content is too high or too low; pressure roller and mold clearance is too large;

2.Particles containing more powder: This is due to low moisture content, pressure roller mold wear seriously and so on. It is necessary to improve the moisture content, replace the new mold and other measures to solve.

3.Particle surface roughness: This is due to excessive moisture content, the initial use of mold and other reasons. It is necessary to reduce moisture content, repeated oil grinding and other measures to solve.

Prev：The Belt and Road new opportunities, twelve Chinese delegation to visit our tour development

Next：Selection of biomass pellet machine

Hot Product

Biomass Pellet Production Line

Sawdust Pellet Production Line

Biomass Fuels Briquetting Plant

LEAVE US A MESSAGE

Common trouble shooting method of wood chips pellet equipment

Common trouble shooting method of wood chips pellet equipment

Equipment in more than 80 countries around the world

COMPANY NEWS

LEAVE US A MESSAGE