Wood Shavings Dryer

Wood shavings can be dried by special rotary dryer, and it has the features of absorbing moisture, easy to clean up, unique curvature, or curls. The wood shavings are safe for animal feet and hooves.

-Raw material type:
suitable to drying sawdust, wood shavings, sawdust, alfalfa, rice husk, bagasse and other biomass materials.

-Applicable:
Dried wood shavings is perfect for the animal bedding of chicken farms, horse farms

Get Solutions / Quote # Customize lines according to your actual needs.

Introduction & Principle

Wood Shavings are perfect for animal bedding. Wood shavings can be dried by a special rotary drum dryer, and it has the features of absorbing moisture, easy to clean up unique curvature, or curls. 

Nowadays many wood shavings factories professionally produce wood shavings from logs. Fresh wood shavings usually have a moisture content of about 45-50%, and it is not suitable for storage and bagging. So need to find ways to reduce the moisture content of the wood shavings.

Dingli Group has been devoted to the research and development of the drying of wood shavings for many years, and our wood shavings dryer successfully solved this problem. Our wood shavings dryer has the features of high heat efficiency, large capacity, less fuel consumption, lower wood shavings breakage ratio, quick drying speed, etc. Wood shavings drying systems mainly consist of log shavers, triple pass wood shavings rotary drum dryers waste wood burners, drum screens, etc. Dingli has always been devoted to the research and production of wood shavings dryers.  

The Flow of the Wood Shavings Project is:

Logs --> Log Shavers --> Wet Wood Shavings -->Triple Pass Wood Shavings Dryer --> Cyclone Separator --> Drum Screen --> Dry Wood Shavings.

After being screened by the drum screen, the small wood particles can be used as fuel for the burner. The burner is connected to the triple pass wood shavings dryer by an air duct tube, and wet wood shavings come into the wood shavings dryer through the feed inlet hole.

Configuration

Wood shavings dryer consists of a heating furnace, feeding port, drum, filter drum, conveying pipe, cooling drum, and discharging port. Wood shavings are fully dried in the rotary drum and get separated again before entering the conveying pipe for further drying. The baffler can keep the impurities out of the conveying pipe and ensures the high quality of dried shavings. With the combined work of a rotary drum and injection pipe, wet materials are fluidized and fully contacted with the hot flow.

Parameters

Model Input(t/h) Output(t/h) Initial Moisture(%) Final Moisture(%) Drying Temperature(℃) Total Power(kw) Plant Area (m²)
DLSG1409 1.53 0.45 40±5 15% (Adjustable) 280±30℃ 34 5m×15m
DLSG1615 2.89 0.85 45 6m×22m
DLSG2008/3 5.2 1.53 78 8m×16m
DLSG2010/3 6.63 1.95 90 8m×18m
DLSG2210/3 7.24 2.13 105 8m×20m
DLSG2510/3 8.91 2.62 125 10m×20m
DLSG2512/3 10.5 3.09 140 10m*24m
DLSG2912/3 12.14 3.57 155 10m*24m

Raw materials and Applications

Our biomass plant is suitable for a variety of different types of raw materials, crushing all kinds of biomass raw materials and pressing them into rod-like biomass pellets or briquettes, which can be used as a new energy for power plant power generation, heating, barbecue, boiler fuel, etc. or process forage such as alfalfa, grass, straw to make animal feeds, and also can be carbonized to make biochar for soil.

What We Offer?

Provide one-stop service, consult us at any time.

# Welcome to discuss your project requirements, we will
give you customized Proposal & Quotation within 24 hours.